Constant Spring Hanger For Thermal Pipes

Introduction

The constant Spring Hanger for thermal pipes is used as a support device for thermal pipes and heated equipment. It is suitable for various pipelines and equipment that generate thermal displacement during operation. When thermal displacement occurs, a constant suspension or support force can still be obtained. Therefore, the load transfer of the pipeline or the equipment and the additional stress caused thereby are avoided to ensure the normal operation of the pipeline or the equipment. After long-term practical application, the operation effect is remarkable.

parameters

l GB spring (P, L, Z) load range: 123-364120N.

l Displacement range: 50-400mm

l Constancy (specified load deviation): Absolute value≤6%

l Relative load deviation: Absolute value≤5%

STRUCTURE FORM

Moment balance structure

Description	Type	Installation	Figure
Horizontal type	PA	The top is connected to the underneath of structural beam with two bolts while suspending the pipe or equipment upward.
	PE	The rooting beam bottom is welded with a two-hole hanging plate and connected with the ear plate on the top of the hanger to suspend the pipe or equipment upward.
Horizontal Seated type	PD	Sit on a beam or support member to suspend the pipe or equipment upward.
Vertical type	LA	The top is connected to the underneath of structural beam with two bolts while suspending the pipe or equipment upward.
	LE	The rooting beam bottom is welded with a two-hole hanging plate and connected with the ear plate on the top of the hanger to suspend the pipe or equipment upward.
Vertical Seated Type	ZA	Sit on a beam or support member to suspend the pipe or equipment upward.

Product picture

Sample design drawing