HFW Fin Tube
Get Latest PricePayment Type: | T/T,L/C |
Incoterm: | FOB |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean |
Port: | Shanghai |
Payment Type: | T/T,L/C |
Incoterm: | FOB |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean |
Port: | Shanghai |
Brand: simcan
Selling Units | : | Piece/Pieces |
HFW Fin Tube
Hfw Fin Tube is the short name of High-frequency welded spiral Finned Tube,widely used in petrochemical, machinery, metallurgy, rubber, printing and dyeing, food, power plants, passenger cars, drying and other industries for heating and cooling. It is the most ideal heat exchange component used on the convection sections of cracking furnaces and reformers, air preheaters, economizers, heat exchangers, crystallizers, radiators and hot pipe technology. In particular, GRD steel finned radiators are widely used in office buildings, residential buildings, hotels, factories and other industrial and civil construction industries, it has good heating effect and is the replacement of traditional cast iron, plate type radiators.
PRODUCTION CAPACITY
Simcan has total four(4) PLC HFW Fin Tube finning lines with monthly production capacity is 1200 tons in total.
DIMENSION AND MATERIAL
The following table shows Simcan’s manufacturing capabilities for HFW Fin Tube:
Tube O.D.: | 16 to 273 (mm) | 3/8” to 10”(NPS) |
Tube Wall Thk.: | 2 to 28.6 (mm) | 0.08” to 1.1” |
Tube Length: | ≤28,000 (mm) | ≤92 ft |
Fin Thk.: | 0.5 to 3.5 (mm) | 0.02” to 0.14” |
Fin Height: | 8 to 35 (mm) | 0.31” to 1.3” |
Fin Pitch: | 3 to 333 FPM | 1 to 8 FPI |
Fin Type: | Solid, “U”or“V” Serrated | |
Fin Material: | C.S. (most common grade: 08F, SPCC) S.S. (most common grade are AISI 304, 316, 409, 410, 321,347 ) A.S. | |
Tube Material: | C.S. (most common grade: A106 Gr.B, A210, A192) S.S. (most common grade are TP304, 316, 321, 347 ) A.S.(most common grade are T/P5,9,11,22,91 ) Duplex Steel(most common grade are 2205 etc. ) | |
* This table is used as a general guide to our capabilities, please call us for any other customized cases. |
APPLICATION
The conditions for the use of finned tubes are: the temperature of the flue gas must not be lower than 380 ° C; heating can generally only by firing gas. When heavy oil is required to be as fuel, the fin spacing should not be less than 2 FPI. Furnaces for burning oil or high viscosity residual oil shall not use finned tubes.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.