H Type Fin Tube
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean,Land |
Port: | Shanghai |
Payment Type: | L/C,T/T |
Incoterm: | FOB |
Min. Order: | 1 Piece/Pieces |
Transportation: | Ocean,Land |
Port: | Shanghai |
Selling Units | : | Piece/Pieces |
H TYPE FIN TUBE
The H-type Finned Tube type economizer technology is a high-efficiency heat exchange economizer assembled by using H-type fin tubes (also known as Square Fin Tubes).
WHY USE H TYPE FIN TUBE
H-type finned tube type economizer structure:
The basic form is "H" type or double "H" type, arranged in a row.
Performance characteristics of H-type Fin Tube economizer
1)The H-type fin tube economizer replaces the bare pipe economizer, which can increase the heat exchange area and reduce the number of pipe arrangements, thereby increasing the cross section of the flue gas flow, reducing the flue gas speed and reducing wear due to the grinding of the pipe
The loss rate is proportional to the 3.33 power of the flue gas flow rate, so if the flue gas speed is reduced from 9 m/s to 7 m/s, the wear rate will be reduced by 43%. At the same time, the experiment shows that the finned tube itself has the function of concentrating the fly ash to the middle of the tube row, so the use of the finned tube economizer has the effect of reducing the wear on the structure.
2)The H-type fin tube can be fabricated into a double-tube "double H" type finned tube, which has a good rigidity and can be applied to a long tube row.
3)The H-type fin tube economizer adopts an in-line arrangement, and the H-shaped fin divides the space into a small area, which has a current sharing effect on the airflow, so that the wear is greatly reduced.
DIMENSION AND MATERIAL
The following table shows Simcan’s manufacturing capabilities for H type Fin Tube:
Tube O.D.: | 25.0 to 73.0 (mm) | 1/2” to 2 1/2”(NPS) |
Tube Wall Thk.: | 3.0 to 6.0 (mm) | 0.118” to 0.236” |
Tube Length: | ≤ 18,500 (mm) | ≤ 60.7 ft |
Fin Thk.: | 1.5 to 4.0 (mm) | 0.060” to 0.157” |
Fin Height: | 25.0 to 45.0 (mm) | 0.98” to 1.77” |
Fin Pitch: | 20 to 117 FPM | 1 to 3 FPI |
Fin Type: | H , HH | |
Fin Material: | C.S. (most common grade is Q235B) S.S. (most common grade are AISI 304, 316, 409, 410, 321,347 ) A.S. (most common grade is 12 Cr1MoV ) | |
Tube Material: | C.S. (most common grade: A106 Gr.B, A210, A192) S.S. (most common grade are TP304, 316, 321, 347 ) A.S.(most common grade are T/P5,9,11,22,91 ) Duplex Steel(most common grade are 2205 etc. ) | |
* This table is used as a general guide to our capabilities, please call us for any other customized cases. |
PRODUCTION CAPACITY
Simcan has Total six (6) H Type Fin Tube finning lines, monthly production capacity is 1200 tons in total.
GALLARY
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.