Square Finned Tube
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB |
Transportation: | Ocean,Land |
Port: | Shanghai |
Payment Type: | L/C,T/T |
Incoterm: | FOB |
Transportation: | Ocean,Land |
Port: | Shanghai |
Selling Units | : | Piece/Pieces |
SQUARE FINNED TUBE
Square Finned Tube is also know as H/HH Finned Tube or Rectangular Fin Tube, It has single tube type(H type Fin Tube) or double tube type(HH or double H type fin tube), is widely used as enhanced heat exchange component for power plant boilers, industrial boilers, furnaces, marine boilers and economizers in flue gas waste heat recovery systems.
WHY USE FINNED TUBES
Rigid structure and higher wear life
Lower flue side resistance, compact assembly, shorter breeching duct and lighter of equipment weight
Square Finned Tube has better performance on anti-ashing and wear resistance than spiral finned tube
Lower thermal contact resistance and higher thermal conductivity
DIMENSION AND MATERIAL
The following table shows Simcan’s manufacturing capabilities for Square Finned Tube:
Tube O.D.: | 25.0 to 73.0 (mm) | 1/2” to 2 1/2”(NPS) |
Tube Wall Thk.: | 3.0 to 6.0 (mm) | 0.118” to 0.236” |
Tube Length: | ≤ 18,500 (mm) | ≤ 60.7 ft |
Fin Thk.: | 1.5 to 4.0 (mm) | 0.060” to 0.157” |
Fin Height: | 25.0 to 45.0 (mm) | 0.98” to 1.77” |
Fin Pitch: | 20 to 117 FPM | 1 to 3 FPI |
Fin Type: | H , HH | |
Fin Material: | C.S. (most common grade is Q235B) S.S. (most common grade are AISI 304, 316, 409, 410, 321,347 ) A.S. (most common grade is 12 Cr1MoV ) | |
Tube Material: | C.S. (most common grade: A106 Gr.B, A210, A192) S.S. (most common grade are TP304, 316, 321, 347 ) A.S.(most common grade are T/P5,9,11,22,91 ) Duplex Steel(most common grade are 2205 etc. ) | |
* This table is used as a general guide to our capabilities, please call us for any other customized cases. |
PRODUCTION CAPACITY
Simcan has Total six (6) medium frequency welded Square Finned Tube finning lines, monthly production capacity is 1200 tons in total.
FABRICATION PROCESS
Q1.What is the referenced codes and standards?
Q2.How do you pack the products
Q3:How do you guarantee the quality?
Q4:Do you have design capability?
A:Yes, we could develop the shop drawings and submit for clients’ approval.
Q4:How do you handle the documentation?
Design and Fabrication Schedule
Fabrication Procedures including WPS, PQR
Inspection and Test Plan (ITP)
Daily, weekly or monthly progress report
A complete set of final archive including:
Raw Material Mill Certificates
Product Conformity Certificates
Inspection Reports including Material Receipt Inspection Report, Test Report etc.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.